p. 22/37
5.
System starting procedures.
ATTENTION:
the hot water electric boiler of series “ELTHERM” should be
installed and commissioned by trained, authorized and certified company only.
5.1.
Basic requirements.
•
The boiler as well as the heating system should be air-free. The system
should be checked for leakages and serviced if any;
•
Check the operation of the circulating pump and make sure its running
properly;
•
Check and verify the electric connections of the boiler. Check any control
modules, connected to the boiler as well as the proper operation of the
heating system;
5.2.
Starting up the hot water electric boiler of series “ELTHERM”.
Basic requirements:
•
Any maintenance procedures should be performed in accordance with the
described in this manual;
•
Any intervention in the working process of the system, which could lead to
unit’s failure and/or dangerous and health threatening situations, are strongly
prohibited;
•
The system should be checked by the maintenance staff or any trained personal
regularly;
•
The end-user should not perform any interventions, repairs, etc. of the system.
In case that warning and failures arise, check the failures table (applied at the
end of this manual) and call the service support if the case is not described
there;
