manualshive.com logo in svg

Gree XE72-44/E, Owner'S Manual

Share
Download
Gree XE72-44/E Owner'S Manual Download Page 23

20

Fig. 21

the rectangular hole behind the soleplate of the wired remote controller.

(3). Stick the soleplate of wired controller on the wall and then use screw M4×25 to fix

Wired Remote Controller XE72-44/E

buckle the front panel and the soleplate of the wired remote controller together.

Table 3

installation hole, that is, no operation is allowed with electricity during the whole installation.

(2). Pull out the four-core twisted pair line from the installation holes and then let it go through 

No.

1

2

3

4

Name

of the Wired 

Front Panel 

Remote Controller

Screw M4X25

Controller

Wired Remote  embedded in the 

wall

Socket box 

1

Soleplate of the 

4

3

Note:

CN1 is 485 communication interface and it used Wired Remote Controller XE72-44/E for connecting 
the 4-core communication wire. These two needle stands(CN2

、

CN3) are used for connecting the 

smart zone controller. There is no sequence for these two needle stands. You can connect one or 
two needle stand(s) basing on the requirement.
Fig. 21 shows the installation steps of the wired remote controller, but there are some issues that 
need your attention.

5

2

(1). Prior to the installation, please firstly cut off the  power supply of the wire  buried in the 

      soleplate and installation hole on wall together.
(4). Insert the four-core twisted pair line into the slot of the wired remote controller and then 

Summary of Contents for XE72-44/E






























Reviews:

No comments

Brands by name

Popular brands

Load more brands