manualshive.com logo in svg

Gree XE72-44/E, Owner'S Manual

Share
Download
Gree XE72-44/E Owner'S Manual Download Page 20

Wired Remote Controller XE72-44/E

17

3.17  I-Demand Setting

Fig. 19 I-Demand Setting

I-Demand on: Press FUNCTION under on state of the unit till the unit enters the I-Demand setting 

interface. Press SWING/ENTER to confirm the setting.

I-Demand off: When the I-Demand function is activated, press FUNCTION to enter the I-Demand 

setting interface. After that, press SWING/ENTER to cancel this function.

Wi

Fi

Wi

Fi

Wi

Fi

Wi

Fi

Wi

Fi

Press “FUNCTION” button into 

I-demand state

Turn on the unit,without turning on 

I-demand function

Press “FUNCTION” button into 

I-demand state

Press “SWING/ENTER” button to turn

off I-demand function

Press “SWING/ENTER” button to turn 

on I-demand function

1.This function is only available in cooling mode.
2.When this function has been set, set temperature is displayed in SE. In this case, temperature setting 
and fan speed setting are shielded.
3.This function will be cancelled when switching modes.
4. This function and sleep function cannot be on simultaneously. If I-demand function is set firstly and 
then sleep/quiet function is set, I-demand function will be cancelled while sleep function will be valid, 
and vice versa.

Note:

Summary of Contents for XE72-44/E






























Reviews:

No comments

Brands by name

Popular brands

Load more brands