manualshive.com logo in svg

Gree XE72-44/E, Owner'S Manual

Share
Download
Gree XE72-44/E Owner'S Manual Download Page 17

Wired Remote Controller XE72-44/E

3.14  Quiet Function Setting

Press the Function button to select the 

“Quiet” function option

Fig. 16 Setting of Quiet Function

Turn on quiet function:

Under unit on status, press FUNCTION button on the panel to select “Quiet” function option. When 

“Quiet” or “Auto quiet” flashes, it enters quiet function setting mode. Press 

▲

 or 

▼

 button to switch 

between “Quiet” and “Auto quiet” function. Then press SWING/ENTER button to activate this function.

Cancel quiet function:

If quiet function has been set, press FUNCTION button on the panel to select “Quiet” function option. 

4

When “Quiet” or “Auto quiet” flashes, if you press SWING/ENTER button without pressing 

▲

 or 

▼ 

button, quiet function will be canceled;  if you press SWING/ENTER button after pressing 

▲

 or 

▼ 

button, quiet function will be activated.

Wi

Fi

Wi

Fi

Press “FUNCTION” button to select the

“Quiet” function option

Turn on the unit with the “Quiet”

function deactivated

Press “SWING/ENTER” button to

deactivate this function

Press “SWING/ENTER” button to

activate this function

Press ▲ or ▼ to select the desired 

type, “QUIET” or “AUTO QUIET”.

Wi

Fi

Wi

Fi

Wi

Fi

Wi

Fi

Summary of Contents for XE72-44/E






























Reviews:

No comments

Brands by name

Popular brands

Load more brands