manualshive.com logo in svg

Gree XE72-44/E, Owner'S Manual

Share
Download
Gree XE72-44/E Owner'S Manual Download Page 22

(4). Selection of the Fan Speed

4  Installation and Dismantlement

Pressing the button “ON/OFF” also can quit this commissioning status but the set data won’t be memorized.

4.1  Connection of the Signal Line of the Wired Remote Controller

●
●
●
●

01: Three low fan speeds; 02: Three high fan speeds

1

4.2  Installation of the Wired Remote Controller

“FUNCTION” and “TIMER”

go to the  commissioning status, and then adjust the display in the temperature display area to 01 
through the button “MODE” and adjust the setting of the fan speed, which comes to two options.

Under the commissioning status, if there is no any operation in 20 seconds after the last button 

press, it will back to the previous state without memorizing the current data.

be up to 20 meters ( the standard distance is 8 meters)

PVC Pipe 

3

4

2

19

Wired Remote Controller XE72-44/E

SWING/ENTER

Fig. 20  Accessories for the Installation of the Wired Remote Controller

Open the cover of the electric control box of the indoor unit.
Let the single line of the wired remote controller through the soleplate of wired controller.

Connect the signal line of the wired remote controller to the 4-pin socket of the indoor unit .
The communication distance between the main board and the wired remote controller can

SWING/ENTER

Under the commissioning status, if there is no any operation in 20 seconds after the last button 

press, it will back to the previous state without memorizing the current data.

Note:

       After connected with indoor unit, if the type of ambient temperature sensor has not been manually 
set, the wired controller will select the ambient temperature sensor according to the model of connected 
IDU; if it connects to cassette type IDU, duct type IDU, floor ceiling type IDU, ceiling type IDU, it will 
adopt 

③

, otherwise it will adopt 

①

. If the type of ambient temperature sensor is set manually, the wired 

controller will subject to the manual setting, and will not set according to automatic IDU model selection.

Pressing the button “ON/OFF” also can quit this commissioning status but the set data won’t be 

memorized.

④

.

Select the temperature sensor at the wired controller under the cooling, dry and fan modes,

and select the temperature sensor at the return air inlet under the heating mode and auto 
modes (04 displayed in the timer display area).

Summary of Contents for XE72-44/E






























Reviews:

No comments

Brands by name

Popular brands

Load more brands