background image

SLIM DUCT B SERIES

 OWNERS MANUAL - INDOOR UNIT

 |

 21

CARE AND CLEANING

 WARNING

• Turn off the air conditioner and disconnect the 

power before cleaning the air conditioner to avoid 
electric shock.

•  Do not wash the air conditioner with water to avoid 

electric shock.

•  Do not use volatile liquid to clean the air conditioner.
•  Do not use liquid or corrosive detergent to clean the 

appliance and do not splash water or other liquid 
on it to avoid damaging the plastic components or 
causing an electric shock.

Clean surface of indoor unit

Only a qualified service person is allowed to perform 

maintenance.

Before accessing to terminal devices, all power supply 

circuits must be disconnected.

Clean the filter and the outside panels with warm water, 

and do not use excessive heat to dry.

NOTE

 

1

 

Do not operate the air conditioner with the filter 

uninstalled, otherwise dust would come into the 

unit.

 

2

 

Do not remove the air filter except for cleaning. 

Unnecessary handling may damage the filter.

 

3

 

Do not clean the unit with gasolene, benzene, thinner, 

polishing powder or liquid insecticide, otherwise it 

would cause discoloration and deformation of the 

unit.

 

4

 

Do not wet the indoor unit in case of electric shock 

or fire hazard.

  Increase the frequency of cleaning if the unit is 

installed in a room where the air is extremely 

contaminated. (As a yardstick for yourself, consider 

cleaning the filter once a half year.) 

  If dirt becomes impossible to clean, change the air 

filter.

Summary of Contents for Slim Duct B Series


























Reviews: