9
TWD-1594 Livo+ owners printer.qxp_Layout 1 2/21/17 2:11 PM Page 21
SLEEP button
TEMP button
7
8
▲
Under COOL or HEAT mode, press this button to start up sleep function.
" " icon is displayed on remote controller. Press this button again to cancel sleep
function and " " icon will disappear.
By pressing this button, you can see indoor set temperature, indoor ambient temp-
erature or outdoor ambient temperature on indoor unit’s display. The setting on
remote controller
is selected circularly as below:
no display
TURBO button
5
Under COOL or HEAT mode, press this button to turn to quick COOL or quick
HEAT mode. " " icon is displayed on remote controller. Press this button again
to exit turbo function and " " icon will disappear.
▲
▲/ button
6
● Press "▲" or " " button once increase or decrease set temperature 1
℃
(1°F)
.
Holding "▲" or " " button, 2s late
r, set temperature on remote controller will
change quickly
. On releasing button after setting is finished, temperature ind
ica-
tor on indoor unit will change accordingly.
●
When setting TIMER ON,
TIMER OFF or CLOCK, press "▲" or " " button to
adjust time. (Refer to CLOCK, TIMER ON,
TIMER OFF buttons)
▲
▲
●
When selecting " ", air conditioner is blowing fan automatically. Horizontal
louver will automatically swing up & down at maximum angle.
●
When selecting "
、
、
、
、
●
When selecting "
、
、
●
Hold " "
button above 2s to set your required swing angle. When reaching
your
required angle, release the button.
Note:
"
、
、
" may not be available. When air conditioner receives this signal, the
air conditioner will blow fan automatically.
OPERATION OF WIRELESS REMOTE CONTROLLER
9
