background image

Explanation of Symbols

WARNING

1.Damage the product due to improper use or misuse of the product;

2.Alter, change, maintain or use the product with other equipment without abiding

by the instruction manual of manufacturer;

3.After verification, the defect of product is directly caused by corrosive gas;

4.After verification, the defects are due to improper operation during transportation

of product;

5.Operate, repair, maintain the unit without abiding by instruction manual or related

regulations;

6.After verification, the problem or dispute is caused by the quality specification or

performance of parts and components that produced by other manufacturers;

7.The  damage  is  caused  by  natural  calamities,  bad  using  environment  or  force

majeure.

Exception Clauses

Manufacturer will bear no responsibilities when personal injury or property loss is 

caused by the following reasons.

This symbol indicates the possibility of death or serious injury.

This symbol indicates the possibility of injury or damage to

property.
Indicates important but not hazard-related 

 

information, used 

to indicate risk of property damage.

If it needs to install, move or maintain the air conditioner, please contact dealer

or local service center to conduct it at first. Air conditioner must be installed,

moved or maintained by appointed unit. Otherwise, it may cause serious damage

or personal injury or death.

When refrigerant leaks or requires discharge during installation, maintenance, or

disassembly, it should be handled by certified professionals or otherwise in

compliance with local laws and regulations.

This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities or lack of experience and

knowledge, unless they have been given supervision or instruction concerning

use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

CAUTION

 

NOTICE

Summary of Contents for Livo Gen 3

































Reviews: