●
3.
●
The drain hose should be bound at the bottom.
1.
●
5.
upper hook
indoor unit
band
●
lower hook of
wall-mounting frame
2.
The power cord and control wire can't be crossed or
winding.
3.
4.
indoor
wall pipe
Step 9:
Hang the indoor unit
2.
4.
3.
outdoor
4.
sealing gum
5.
gas
Step 8:
Bind up pipe
1.
pipe
liquid pipe
drain hose
indoor and
outdoor power cord
The wiring board is for reference only, please refer
to the actual one.
20
Do not bend the drain hose too excessively in order
to prevent blocking.
drain hose with the band.
connection pipe
drain hose
band
indoor power cord
make them pass through the wall hole.
Hang the indoor unit on the wall-mounting
frame.
Stuff the gap between pipes and wall hole
with sealing gum.
Fix the wall pipe.
Check if the indoor unit is installed firmly and
closed to the wall.
Bind up the connection pipe, power cord and
Remove the wire clip; connect the power conn-
ection wire to the wiring terminal according to
the color; tighten the screw and then fix the po-
wer connection wire with wire clip.
Bind them evenly.
The liquid pipe and gas pipe should be bo-
und separately at the end.
Put the bound pipes in the wall pipe and then
Put wiring cover back and then tighten the screw.
Close the panel.
Reserve a certain length of drain hose and
power cord for installation when binding th-
em. When binding to a certain degree, sep-
arate the indoor power and then separate
the drain hose.
Outdoor unit connection
white
green
black red
(brown) (yellow-
green)
(blue)
N(1)
2
3
09K 12K 15K 18K 24K :
NOTICE
NOTICE
NOTICE
