72
Installation and Maintenance
Service Manual
Step
Procedure
Loosen the clasps on the back of front case assy.
Life the front case assy upwards to remove it.
5. Remove display board and drive motor
Remove the screw fixing the decorative plate
,
Remove the decorative plate.
Remove the screw fixing the detection board;
remove the wiring terminal of detection board and
then remove the detection board.
Disconnect the conversion board wiring teminal
in the display board; loose the clasp at the right
side of display board and then remove the display
board.
clasps
clasp
Detecting Plate
Decorative plate
Display Board
Wiring terminal of pinboard
screw
screw
screw
Wiring terminal
of detecting plate
