Multi VRF Floor Standing Indoor Unit
13
setting status. After quiting the function setting status, the “
” icon is on, it means the air
renewal function has been turned on.
③
Cancel air renewal: press “Function” button to switch to air renewal function, when “
”
icon flickers, press “▲”or“▼” button to set the air renewal as “00”, then the air renewal
function is canceled; press “ON/OFF” button or without pressing any buttons for
consecutive 5 seconds, it will quit the function setting status. After quiting function setting
status, the “
” icon is off, it means the air renewal function is canceled.
④
Adjustment range of air renewal level: it can adjust the air renewal level to be 00~10, in
which “00” refers to closing down air renewal function.
(6) Setting of Sleeping Function
①
Sleeping function: set the unit to enter into sleeping operational status, the unit will operate
according to the preset sleeping temperature curve to create a confortable sleeping
environment and improve sleeping quality.
②
Turn on or cancel sleeping function: press “Function” button under power-on status to
switch to sleeping function, when “
” icon flickers, press “▲”or“▼” button to turn on or
cancel sleeping function. If “
” icon is on, it means the sleeping function is turned on; if
“
” icon is off, it means the sleeping function is canceled.
③
There is no sleeping function under auto and swing mode.
(7) Setting of energy-saving function
①
Energy-saving function: through setting the lower temperature limit of cooling and dry
mode and upper temperature limit of heating mode, to make the air conditioner operate
in a smaller temperature range, thus save energy.
②
Turn on cooling energy-saving: with the unit is started up, under cooling or dry mode,
press “Function” button to switch to energy-saving function, when “
” icon flickers,
press “▲”or “▼” button to adjust cooling temperature limit, after setting cooling
temperature limit, press “ON/OFF” button or without pressing any buttons for
consecutive 5 seconds, the energy-saving function is confirmed to be turned on and quit
the function setting status. After quiting function setting status, the “
” icon is on, it
means the cooling energy-saving function has been turned on.
③
Turn on heating energy-saving: with the unit is started up, under heating mode, press
“Function” button to switch to energy-saving function, press “▲”or “▼” button to adjust
heating temperature limit, if the “
” icon flickers, after setting heating temperature limit,
press “ON/OFF” button or without pressing any buttons for consecutive 5 seconds, the
energy-saving function is confirmed to be turned on and quit the function setting status.
After quiting function setting status, the “
” icon is on, it means the heating
energy-saving function has been turned on.
④
Cancel energy-saving function: under energy-saving function setting status or under
normal power-on status, press “Function” button and “▼” button simultaneously to
cancel energy-saving function, when “
” icon is off, it means the energy-saving
function is canceled.
6.2.6 Speed Settings
Under power-on status, press “Speed” button, the speed will be circularly switched according
to the following order:
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
