AHU-KIT
27
4.5 Installation of the Control Box
Fig.4.5.1
(1) Fix the control box with its hanger brackets to the mounting surface.
(2) Open the lid of the control box.
(3) For electrical wiring: refer to the following contents.
(4) Install the screw nuts.
(5) Close the unnecessary openings.
(6) Close the lid securely after installation to ensure that the control box is watertight.
4.5.1 Wire connection Inside the Control Box
4.5.1.1 Wire connection of single AHU-KIT control part
NOTICE!
Put through the wires to the coil, tighten the coil while maintaining loose condition of wires to
ensure it is not closely tied up and is waterproof.
Fig.4.5.2
