background image

6

 NOTE:

•   The description for below installation is for the standard vertical double hung / horizontal sliding 

window.

•   If you need to install the air conditioner in an over sized window, you may need to use the 

Extension 

Panel

 and 

Adjustment Panel

. Please refer to requirement of window size for details and Installation 

Instructions. 

•   All parts must be secured to firm wood, masonry, or metal. 
•   The electrical outlet must be within reach of the power cord. 

Where to Install the Unit 

•  Ensure there is no obstruction near the air-inlet or air-outlet.

•  This unit is for indoor use only.

•  This unit must be positioned so that the plug is accessible.

•   Reserved space around the air conditioner should be at 

least 12" (30 cm), see image.

•   Place air conditioner on a level and flat surface for operation 

and avoid inclining or tipping the unit.

•  This unit is equipped with casters. 

•  Do not place unit on an elevated surface. 

12" 

(30 cm)

12" 

(30 cm)

12" 

(30 cm)

INSTALLATION INSTRUCTIONS

NOTICE:

 

This picture is for reference only.  Please refer to the actual product for the appearance.

Summary of Contents for G16-10PACSH






























Reviews: