GREAT PLANES Lancair ES, Instruction Manual

Page: 38 / 40

is suitable for anyone who’s mastered low wings. Lift from
three flat bottom airfoils increases stability and allows
realistic, slow landing speeds. Two aileron servos – one in
each top wing half – provide strong, fast response.
Assembly takes as little as 15 hours! The lightweight, all-
wood airframe comes covered in a historically accurate
MonoKote trim scheme, with engine-concealing fiberglass
cowl painted to match. Requires a 2-stroke .46-.75 or
4-stroke .52-.80 engine and 4 or 5-channel radio w/5 standard
servos. GPMA1380
Great Planes Master Caddy Prebuilt Field Box
Built to last, the sturdy ply, 90% assembled Master Caddy
Prebuilt has a place for all of your important field
accessories and tools. Within its 25" x 15.75" x 8.25"
dimensions are three open top compartments, two roomy
drawers with dividers and a shelf for a gallon can or jug of
fuel. Cushioned cradles adjust to hold your model safely
during maintenance or repair. In the detachable APS
(Auxiliary Power Station), carry your standard power panel,
12V battery, starter, glow plug clip and tools – whatever you
need for the flight line. GPMP1001
Great Planes C.G. Precision Aircraft Balancer ™
Accurate balancing makes trainers more stable, low-wings
more agile, and pylon planes move at maximum speed. The
innovative C.G. Machine helps you achieve optimum
balance easily, without measuring or marking–and without
the errors that fingertip balancing can cause. You’ll quickly
pinpoint your plane’s exact center of gravity. Then you’ll
know at a glance whether weight should be added, removed
or relocated. The C.G. Machine works with kits and ARF
models of any size and wingspan. Its slanted wire balancing
posts support models weighing up to 40 pounds. GPMR2400
Great Planes Accu-Throw ™
Control Surface Deflection Meter
One leading cause of crashes is flying an airplane with its
control throws set differently from those recommended in
the instructions. The Great Planes Accu-Throw lets you
quickly and easily measure actual throws first, so you can
make necessary corrections before you fly. Large, no-slip
rubber feet provide a firm grip on covered surfaces without
denting or marring the finish. Spring tension holds Accu-Throw’s
plastic ruler steady by each control surface. Curved to
match control motions, the ruler provides exact readings in
both standard or metric measurements. GPMR2405.
Great Planes Pro ™ Adhesives
“Best if used by” dates on the label provide visible proof of
freshness on all Pro CAs. Available in formulas that range
from thin, quick-bonding CA to Gel – a formula so thick that
it won’t run even on nearly vertical surfaces. Pro Epoxies are
available in money-saving 4-ounce sizes. Also available: CA
debonder; CA activator; Glue-B-Gone
™ adhesive remover;
Pro Wood Glues; Pro Threadlocker; and Milled Fiberglass
Reinforcer. GPMR6001 thru GPMR6049
38