GREAT PLAINS Yield-Pro Air-Pro YP2425A, Operator'S Manual

Page: 19 / 180

YP2425A Table of Contents Index Preparation and Setup
Great Plains | 401-626M | 2019-06-11 Table of Contents Index 15
Preparation and Setup
This section helps you prepare your tractor and
YP2425A Planter for use, and covers tasks that need to
be done seasonally, or when the tractor/planter
configuration changes.
Before using the YP2425A Planter in the field, you must
hitch the planter to a suitable tractor, inspect systems,
level the planter. Before using the planter for the first
time, and periodically thereafter, certain adjustments and
calibrations are required.
Post-Delivery/Seasonal Setup
On initial delivery, use with a new tractor, and seasonally,
check and as necessary, complete these items before
continuing to the routine setup items:
•
Install seed monitor console in tractor (page 155).
•
Bleed hydraulic system (page 107).
•
Wing leveling and alignment (page 110).
•
Marker setup (page 61)
•
Radar calibration (page 155).
•
De-grease exposed cylinder rods if so protected at
last storage.
Pre-Planting Setup
Complete this checklist before routine setup:
 Read and understand “ Important Safety
Information ” on page 1.
 Check that all working parts are moving freely, bolts
are tight, and cotter pins are spread.
 Check that all zerks are in place and lubricated. See
“ Lubrication ” on page 115.
 Check that all safety decals and reflectors are
correctly located and legible. Replace if damaged.
See “ Safety Decals ” on page 6.
 Inflate tires to pressure recommended and tighten
wheel bolts as specified. See “ Specifications and
Capacities ” on page 139.