GREAT PLAINS 3N-3010, Operator'S Manual, Page: 77 / 118

196-366m Table of Contents Index Veris Drive Operating Instructions
Great Plains | | 4/22/19 Table of Contents Index 73
Drive Calibration Number
1. Turn on Veris Console Monitor by pressing ON/VR
key.
 Green light above ON/VR key will illuminate when
power is on.
2. Adjust desired metering rate by pressing the Up/
Down arrow keys.
Refer to Figure 47
3. Press Function key until Calibration Number
window appears.
Refer to Figure 48
4. Use Up/Down arrow keys to set Calibration
Number.
Refer to Figure 49
 NOTE: Select drive Calibration Number based on
row spacing and metering wheel, from chart on page
81.
Figure 47
Figure 48
Figure 49