32Great Plains
| | 4/22/19
Great Plains
|
32
196-366m
Operating Instructions
Parking
For information on long-term storage, refer to “Storage”,
This drill has negative tongue weight when unfolded.
Unhooking the drill from the tractor when the drill is unfolded
could cause the drill tongue to raise suddenly, hitting or
crushing bystanders. To avoid serious injury or death, never
unhook the drill from the tractor when the drill is unfolded.
1. Fold the drill. Refer to “Folding the Drill,” page xxvi.
Refer to Figure 11
2. Park the drill on a level, solid area.
3. Securely block the tires to prevent rolling.
4. Remove the jack from its storage stob. Pin the jack
in parking position. If the ground is soft, place a
board or plate under the jack.
5. Extend the jack until tongue weight is off the
drawbar.
6. Unplug the hydraulic lines from the tractor. Do not
allow hose ends to rest on the ground.
7. Unplug the drill light cable from the tractor. If outfitted
with an optional monitor, unplug monitor harness
from console.
8. Remove hitch pin and safety chain from tractor
drawbar.
19101
Figure 11