Great Plains
| 118-949M | 2018-07-03
120
1525P and 1510HDP
Appendix B - Initial and Option Setup
Appendix B - Initial and Option Setup
Pre-Delivery Items
These items are normally completed by the Great Plains
dealer prior to releasing the implement to the customer.
Install Press Wheels
To meet highway clearance requirements, press wheel
arms and wheels on wing rows are not factory-installed.
1.
Remove and save the
1
2
-13x1 inch hex head bolt
and washer
at the back of an incomplete row unit
.
There are four bolts at this location. Remove only the hex head
bolts. Do not loosen or remove the square head bolts forward.
2.
Remove and save the
1
2
-13
1
1
2
inch hex head
bolt
, washer, and eccentric adjuster nut.
3.
Align the
1
2
inch holes in the press wheel assembly
with the
1
2
-13 tapped holes in the row unit, loosely
assemble with the
1
2
-13
1 inch hex head bolt and
washer
.
4.
Loosely screw in the
3
8
-13
1
7
16
inch hex head
bolt
, washer, and eccentric adjuster nut. Rotate
the adjuster to visually align the press wheel
assembly with the row unit, and tight the adjust and
both bolts.
Figure 161
Press Wheel Assembly
25383
1
2
4
3
