User Guide, 392-0057 Rev K, DCO G578
Page
25
of
42
Figure 17
Pausing and Resuming Data Collection
If the patient needs to remove the sensors during the day (e.g., to bathe) but plans to continue wearing
them, the pause/resume feature should be used as follows:
1.
Prior to removing the Kinesia Motion Sensors, press the ‘Pause’ button on the Kinesia 360
Application Main Screen.
2. Remove the Kinesia Motion Sensors and place them in a secure location for duration of activity.
3. When ready to resume, don the Kinesia Motion Sensors, paying careful attention to ensure that
each sensor is placed in the correct position, using the icons on the sensors for reference.
4.
Once the Kinesia Motion Sensors are on, press the ‘Resume’ button on the Kinesia 360
Application Main Screen.
Note
: The times when the Pause/Resume is pressed are used to exclude certain periods of data from
the analysis. If a patient puts the sensors back on but forgets to press the Resume button, this data
will not be included in the report. It is, therefore, very important that patients are well instructed on the
proper utilization of this feature.
Figure 18