User Guide, 392-0057 Rev K, DCO G578
Page
11
of
42
•
Charging Pad
•
Smartphone USB Charging cable
•
Charging Pad Power Cable
2. Place the Charging Pad on the table with the orange circles facing up. Plug the Charging Pad
Power cable into the Charging Pad as shown below (Figure 4) and plug the other end into the
power outlet.
Figure 4
3. Place the Kinesia Sensors, centered on the orange circles (Figure 4). If the sensors were
shipped inside of wrist/ankle straps (Figure 5), they should remain in the straps while charging.
The symbols embroidered on the underside of each strap (i.e., a hand or foot) should be facing
upwards as shown below. If the sensors are not inside wrist/ankle straps, the sensors should
be placed on the Charge pad with the Kinesia logo facing down to charge.
Figure 5. Sensors Correctly Placed on the Charge Pad