Heater - Pool Connections
These instructions assume that the pool and filter system are already assembled and
there is a hose attached to the pool return (pool water inlet).
Place the solar heater in a location where it will receive the greatest amount of sunlight
and at least 3 Meter away from pool.
1) Heater - Filter Pump Connection
prevent water from flowing through the hoses.
placement, choose one side to be the inlet and the other to be the outlet.
e. Locate long filter hose and attach between pump (the port where the pool
return hose was previously connected.) and the inlet using the hose clamps.
Winterizing:
Drain all the water from the solar heater by disconnecting the hoses.
CAUTION
Do NOT allow standing water inside the solar heater to freeze. Water expands as it
freezes and rupture the solar coils on the heater.
Connector with O-Ring (2)&Gasket(2)