Unpacking Your Solar Heater
Carefully remove the product and all component parts from the box. Make certain all
parts are present before beginning assembly. (see Section 2, Parts List/Reference).
Refer to Appendix for a complete EXPLODED VIEW PARTS DIAGRAM.
Tools & Equipment Required
The following items are not included with your new solar heater, but will be required for
proper installation and operation:
•#2 Phillips screwdriver
•¼" Flat head screwdriver
• Silicone based lubricant
Know Your Pool
Before you begin installation it is a good idea to know certain specifications about your
pool: How big is your pool?
How many gallons does it hold?
What size hose does it use? (i.e. 1¼” dia, 1½” dia or 2¼” dia)
What kind of hose connection does your pool use? (i.e. threaded/unthreaded) What
location will position the heater for maximum sun exposure?
Solar Heater Location
You will need to position the heater lower than the pool’s water level and at a safe
distance away from the pool (see Section 1, Safety Warnings)
•The unit(s) should never be placed on the roof of any structure, or more than 1,5
Meter above the water level of the pool.
NOTE
: The solar bag is to be installed between the filter and the pool water inlet,
AFTER the water is filtered. The heater must come after the filter to prevent buildup in
the tubing.
IMPORTANT
: If you are using a chlorine generator OR an in line chlorinator, it must be
connected in-line following the solar heater to prevent damage to the heater.
CAUTION
Before loosening any threaded connections on your filter, pump or pool, be sure that
the suction and pressure hoses on the filter are closed or blocked to prevent water flow
3. PARTS LIST / REFERENCE
Primary Components
Main Unit (1)
Connector with O-Ring(2)&Gasket(2)
www.PiscinasDesmontables.com
