GrayWolf IAQ SURVEYOR II, Operating Instructions Manual

Page: 57 / 100

57
MAN IAQ Surveyor Issue 11 2004
4. DATALOGGING FACILITIES
(3) Use the cursor up/down arrows to select the required
Location.
(4) If necessary, press the cursor left arrow to return to the
list of Sites.
4.2.7 Using the Alphanumeric Selection Screen
Use the alphanumeric selection screen to add, or rename, a
Site or Location (see Sections 4.2.2 or 4.2.3).
An alternative to using this screen is to connect the
instrument to a PC and use the WolfSensePC Software to
rename the Site or Location.
Note: Upper case characters are only available when using
the alphanumeric selection
screen, however, upper or
lower case characters are
available when using the
WolfSensePC Software.
(1) When the alphanumeric
screen is
fi rst displayed,
the letter
J
is highlighted,
together with the fi rst
character of the Site or
Location name.
(2) Use the four cursor keys, up/down and left/right, to
move the cursor around the
QWERTY
display and
to highlight the fi rst alphanumeric character that is
required for the new name.
(3) Press
F1
to select the character, which is then inserted
in the Site or Location name at the position of the
highlighted character.