GrayWolf IAQ SURVEYOR II, Operating Instructions Manual

Page: 30 / 100

30
MAN IAQ Surveyor Issue 11 2004
2. USING THE INSTRUMENTS
the log memory is full. This reading is calculated
on the probes currently connected and the
channels that are enabled.
Log Used
Approximate percentage of the log memory
capacity that contains data.
Key Beep ON/OFF
refers to the beep that sounds each
time one of the instrument buttons is pressed.
Auto Log ON/OFF
refers to the Autostart log facility (see
Section 4.3).
ON indicates that Autostart logging has been
programmed to take place, although it may not
have yet started.
Log Status ON/OFF
refers to the Continuous Logging facility
(see Section 4.3).
Continuous Logging is started, or stopped,
by pressing the
LOG
button (while the
Measurement screen displayed).
Refer to Section 4.3 to change Auto Log and Log
Status.
Prb 1 S/No.
Serial number of the probe that is connected to
the Connector 1 position.
Prb 1 Ver.
Version number of the probe con fi guration.
Prb 1 Filter
Whether the probe has adaptive fi ltering
enabled.
Prb 2 S/No.
Serial number of the probe that is connected to
the Connector 2 position.
Prb 2 Ver.
Version number of the probe con fi guration.