GrayWolf IAQ SURVEYOR II, Operating Instructions Manual

Page: 62 / 100

62
MAN IAQ Surveyor Issue 11 2004
4. DATALOGGING FACILITIES
screen.
(2) Highlight
Data Logging
and press
ACCEPT
to display
the Data Logging screen.
(3) Highlight
Log Timing
and press
ACCEPT
to display
the Log Timing screen, with
Interval
highlighted. The
time shown is the default time interval.
(4) If necessary, change the default time interval by
pressing the cursor right arrow once to highlight the
units of minutes, or twice to highlight the units of
seconds.
Increase these times by using the up arrow, or
decrease by using the down arrow, then press the left
arrow until
Interval
is highlighted.
(5) Highlight
Auto St.
and then press the right arrow to
highlight
OFF
.
(6) Press the up arrow to change to
ON
(down arrow to
return to
OFF
) and to add the Autostart
Start
and
Finish
times to the display.
(7) To set the
Start
time, highlight
Start
and use the left/
right arrows to move to the required portion of the
time/date. Use the up/down arrows to change the time/
date.
Log Timing screen ... ... with the Autostart ON