First contact
IS400 machine
. 35
7.
If it does not, take the cutter out, adjust the position of the tool-holder using the joystick, and
put the cutter in again.
8.
Repeat steps 6 and 7 until the cutter easily slides in.
9.
Once it is correctly adjusted, take the cutter out of the spindle.
10. Adjust the position of the Z mechanical stop.
Adjust the Z position so that surface (A) and surface (B) are aligned (diagram 41).
11. Set the adjustment. Validate twice.
The machine adjustment is recorded by the machine
.
SAVE CONFIGURATION
Saving ...
