![background image](http://html1.mh-extra.com/html/gravograph/is400/is400_user-manual_2258795026.webp)
IS400 machine
. 26
First contact
Transfer procedure
You have just created a composition with your engraving software.
1.
From your engraving software, transfer the composition to the IS400 machine.
The engraving machine displays the number of bytes received :
To engrave
XXXX bytes received
The following message is displayed for a few seconds as soon as the transfer is complete :
TRANSFER COMPLETED
Then the following message is displayed :
<READY TO RECEIVE>
To engrave
The machine is ready to engrave.