![Gravely pro-stance 36 994131 Operator'S Manual Download Page 12](http://html1.mh-extra.com/html/gravely/pro-stance-36-994131/pro-stance-36-994131_operators-manual_2258656012.webp)
EN - 10
NOTICE:
page 11 during setup.
1. Remove packaging and unit from
container.
2. Open bypass valves (Item 1 and Item 2)
3. Push unit onto a level surface.
4. Close bypass valves.
5. Check tire pressures (see
6. Unlock and lower operator platform
(Item 3) into operating position (see
7. Clip cable tie and remove wrap from
steering levers.
8. Check steering lever positions (Item 4)
9. Remove battery (Item 5) from unit and
10. Check engine oil level and add if needed
(see engine manual).
11. Check hydraulic fluid level and add if
12. Fill engine fuel tank (Item 6) with clean
IMPORTANT:
See engine manual for fuel
type.
13. Inspect all hardware and tighten if loose.
14. Check safety interlock system functions
15. Lubricate all fittings (see
16. Place discharge chute in the operating
position. Return and tighten knob in
original position on deck for storage
(Figure 3).
17. Check that mower deck (Item 9) is level
per factory standards (see
18. Check all control functions and ensure
unit operates properly (see
SETUP
WARNING:
AVOID INJURY. Read
and understand entire Safety
Section before proceeding.
CAUTION:
Avoid injury! Explosive
separation of tire and rim parts is
possible when serviced incorrectly:
• Do not attempt to mount a tire
without proper equipment and
experience to perform the job.
• Do not inflate tires above
recommended pressure.
• Do not stand in front or over the
tire assembly when inflating. Use
a clip-on chuck and extension
hose long enough to allow you to
stand to one side.
WARNING:
FAILURE OF
INTERLOCK
together with improper
operation can result in severe
personal injury.
WARNING:
FAILURE OF
CONTROLS could result in death or
serious injury.
Transport Position
Operating Position
Figure 3