10
◎ Binding & RF Range Test
BIND
Press and hold Bind button for 3 sec while your receiver
is powered on and then LED indicator is off. Now press
Bind button of your transmitter and then receiver’s LED
indicator is off.
(Control Switch)
RF RANGE TEST
When BIND button is touched after the connection between
transmitter and receiver, RF RANGE TEST is now activated.
RF TEST is continued during 90 seconds and it is auto-
matically deactivated.
RF RANGE TEST is deactivated by touching BIND button
during RF RANGE TEST mode.
Please note that your model is not controllable if your
model is far away from you during Test mode due to the
short transmit distance.
◎ Control Switch Functions
1. REV (Reverse Switch)
This is used to change the direction of the servo travel for proper
control when activated.
If you steer right and the wheels go left, change the “ST” switch
from “Nor” to “Rev” or “Rev” to “Nor”
if needed. The same applies to the throttle.
2. ST D/R (Steering Dual Rate)
It is used to adjust the overall travel of
the steering servo. (Adjustable from 0 % to
150%)
3. TH EPA-FW, EPA-BR (TH EPA-FW, EPA-
BR) It is used to adjust the overall travel
of the steering servo. (Adjustable from 0 %
to 150%)
ST(Steering)
ST(Dual Rate)
ST(Trim)
BIND Button
BIND Button
BIND / RANGE TEST
TH(Reverse Switch)
TH(EPA-BR)
TH(Trim)
TH(EPA-FW)
Summary of Contents for X-4S HoTT SJ
Page 16: ......
