14
◎ Smart Box (Configuration by Telemetry)
The use of optional smart box supports easy configuration.
When operating in SETTING & DATA VIEW mode in telemetry box,
the screen appears as follows.
RECEIVER 0.01 >
>AL RX-V(5.1V) : 3.7V
AL RX-T(+33`c): 65`C
PERIOD : 10ms
AL EX-V( 7.4V): AUTO
AL EX-T( 27`C):100`C
Electric & Engine model configuration
Red wire sensor cable
ESC
Connect a battery to red cable(+)
Battery connection
Motor connection
Power switch
Temperature sensor
Connect temperature sensor to Engine head
Steering Servo
Receiver battery
Throttle Servo
Steering Servo
T/V Connector
T/V Connector
B/T Connector
CH2 Connector
CH1 Connector
CH2 Connector
CH1 Connector
<Electric model Configuration>
<Engine model Configuration>
Smart Box (#33700)
1. ALARM VOLT
It is used for low battery warning program. (Adjustable from 3.5V to
8.0V)
The default value is 3.7V.
2. ALARM TEMP
It is used for receiver’s warning program (Adjustable from 30℃ to
80℃)
The default value is 65℃
3. PERIOD
It is used to set the speed of receiver’s output signal. (Selectable
10msec or 20msec)
Summary of Contents for X-4S HoTT SJ
Page 16: ......
