Operating Instructions Sky Surfer 2.0
30
Terminal
Terminal
Plastic tube
Plastic tube
Plastic tube
Connector tube
Connector tube
Assembly of parachute support:
1. Fit the parts together in the numerical order
(1 - 3)
2. Slip the parachute support through the
holes in the ribs (4)
3. Ensure that the plastic tubes are pushed
right into the coupling sleeves - see (5 - 6)
Pay your most
careful attention
not to damage
the parachute when
getting the parachute
support in and out.
The parachute support rod can be removed for easier transport.
Note:
the joined reinforcing rod is longer than the span of the canopy. it is under constant
light tension when installed, and cannot fall out.