Operating Instructions Sky Surfer 2.0
34
Rise off ground without assistant
Turn ON transmitter first and then the model.
If the wind is less strong, place the parachute
as shown in the figure on your feet and give full
throttle on the transmitter. After rolling about 4 -
5 m on level ground the Sky Surfer should take
off.
Please note:
depending on wind conditions, the
Sky Surfer is rising faster or slower, but usually
at a 10 degree angle - which is relatively flat. Make sure before you start that there are no trees
or other obstacles in the flight path!
Note the wind direction! Always start against the
wind direction.
If the wind is so strong that the Sky Surfer 2.0
does not remain on the starting spot, no start is
possible!
Hand launching
Turn ON transmitter first and then the model.
Note the wind direction! Always start
against the wind direction.
45° - Note the wind
direction
Place in a 45 degree angle
against the wind.
To start, hold the Sky
Surfer 2.0 at the bot-
tom of the chassis
Move the arm shown with a uniform motion from bot-
tom to top as shown in the fig. Do not throw! Once
the parachute is fully deployed, give full throttle on
the transmitter.
Release the model not
until it is directly over your
head.
