elektro
Skalar
14
1.6 Assembling the sub-structure
(bag SKA-4)
The laser-cut spacer washer set contains three different types:
A
= two 2.2 mm holes;
B
= one 2.2 mm hole;
C
= one 3 mm hole
First assemble the three CFRP plates to form the battery tray 4475.100, set the parts exactly at
right-angles, and glue them together using cyano. Attach the spacer washers as shown in the
drawing.
Glue the spacer washers to both sides of the upper partial frame 4475.101 using cyano, in the
positions shown in the drawing.
Summary of Contents for Skalar
