GRAUPNER Skalar, Manual

Page: 17 / 59

elektro
Skalar
17
1.8 Power supply to the drive motor
The two flight batteries are wired in series to produce a sum of the two voltages. The diagram
shows the basic wiring of the batteries, speed controller and drive motor; the exact procedure is
described in the instructions supplied with the speed controller and drive motor.
1.9 Installing the flight batteries
The flight packs are housed in the battery tray inside the mechanics sub-structure, and retained
using Velcro (hook-and-loop) tape. You can set the correct Centre of Gravity by adjusting the
fore-and-aft position of the batteries; they should then be secured permanently using Velcro ca-
ble ties.