GRAUPNER Skalar, Manual

Page: 23 / 59

elektro
Skalar
23
3.3 Installing the auxiliary rotor
Assemble and install the rocker 4618.27 as shown in the drawing. The hole in the pivot pin
4618.28 must line up with the through-hole in the rocker, so that the flybar can be fitted through
it later without jamming or binding. Secure each ballrace by fitting an M2 x 4 screw in the centre
piece on each side. Check that the rocker swivels freely.
Press the ballraces 4618.6 into both sides of the rocker. Slide the flybar 4618.67 through the
rocker and set it exactly central, so that it projects by an equal length from both bearings.