GRAUPNER Skalar, Manual

Page: 53 / 59

elektro
Skalar
9
Graupner
Order No.
Description Dimensions
[mm]
No. off
reqd./pack
1252.11 Blade holder 2
1254.13 Axial bearing 2
4448.37 Control bridge, 3-part 1
4448.132
4444.132A
Mixer lever set, cons. of:
Mixer lever
Ballrace
Brass sleeve,
Brass spacer washer,
Cheesehead screw
Brass linkage ball
7/3x3
5/3x4
5/3x0,6
M2x10
2
4
2
2
4
4
4448.134 Flybar paddle 2
4448.135 Plastic double link 2
4450.44 Steel pin 2x28 2
4607.28 O-ring 2
4607.31 Ballrace 8/16x4 2
4607.36 Brass ball collet 2
4618.6 Ballrace 4/13x5 2
4618.27 Rocker, 2-part 1
4618.28 Steel pivot pin 1
4618.29 Ballrace 3/10x4 2
4618.46 Collective pitch compensator hub 1
4618.47A Collective pitch compensator, complete 1
4618.48A Collective pitch compensator arm
Brass pin, bored
Brass pin
Circlip
2,3 1
1
1
3
4618.151 Straight pushrod M2,5x60 2
4618.55 M2 ball-link and ball 2 / 10
4618.67 Flybar 1
4618.80 Special socket-head cap screw M4x35 2
4618.87 Special socket-head cap screw M3x18 1
4618.150 Cranked pushrod M2,5x75 2
4618.155 M2.5 ball-link, excl. ball 8 / 10
4682.26 Rotor head centre piece 1
4682.29 Hardened blade pivot shaft 1
107 Grubscrew M3x3 2
565.20 Socket-head cap screw M3x20 2
567.12 Socket-head cap screw M 5x 12 2 / 10
617 Self-locking nut M4 2
704.4 Cheesehead screw M2x4 2 / 20
704.8 Cheesehead screw M2x8 6 / 20
704.10 Cheesehead screw M2x10 10 / 20
710 Nut M2 8 / 20
712 Nut M3 3
As required:
4450.56 Shim washer 8/14x0,3 5
4450.57 Brass shim washer 5/8x0,5 5
4450.86 Shim washer 3/5x0,1/0,2 5