GRAUPNER POWERCAT 2125, Building Instructions

Page: 22 / 32

GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Keine Haftung für Druckfehler. Technische Änderungen vorbehalten! #0059939
04/2008
22
Parts List - Powercat
Part No. Description Material Dimensions
No. off
1 1 Bottom hull section ABS, vac. moulded ABS, 1.5 mm
2 0.5 m Square ABS strip ABS strip 3 x 3 x 500 mm
3 1 Transom reinforcement Plywood, 4mm Laser-cut
4 1 Sponson former Plywood, 1mm Laser-cut
5 1 Deck former Plywood, 1mm Laser-cut
6 1 Horizontal crutch Plywood, 1mm Laser-cut
7 1 Servo mount, top Plywood, 4mm Laser-cut
8 2 Servo mount, side Plywood, 4mm Laser-cut
9 1 Top hull shell ABS, vac. moulded ABS, 1.0 mm
10 2 Boatstand support, side Plywood, 4mm Laser-cut
11 1 Boatstand support, top Plywood, 4mm Laser-cut
12 2 Wedge Plywood, 4mm Laser-cut
13 2 Support Plywood, 4mm Laser-cut
14 0.25m Silicone tubing 5 x 7 x 1 mm Ready made
15 6 Planing panel ABS, 1.0 mm Laser-cut
16 2 Motor mount support Plywood, 1mm Laser-cut
17 1 Front motor mount holder Plywood, 4mm Laser-cut
18 2 Side motor mount holder Plywood, 4mm Laser-cut
19 1 Motor mount Ready made 1157.2
20 1 Rudder system and strut Ready made Ready made, Ord.No. 3341
21 1 Flexi-shaft / Teflon sleeve Ready made Ready made, Ord.No. 3364
22 1 Protective tube Aluminium tube 7 x 6 x 55
23 2 Rubber bellows Ready made Ready made, Ord.No. 3356
24 2 Swivel pushrod connector Ready made Ready made, Ord.No. 3364
25 2 Hatch cover ABS, vac. moulded ABS, 1.0 mm
26 2 Front air intake ABS, vac. moulded ABS, 1.0 mm
27 2 Curved air intake (two-part) ABS, vac. moulded 5 x 4 x 25
28 2 Angled air intake (two-part) ABS, vac. moulded ABS, 1 mm
29 2 Exhaust pipe ABS, vac. moulded 7 x 6 x 40
30 1 Speed 700 electric motor Ready made Not included
31 1 Capacitor Ready made Not included
32 1 Cable, 2.5mm² Ready made Not included
33 1 G2 plug + socket, 1 set Ready made Not included
34 1 Decal sheet Ready made
Essential accessories, not included
Order No. 2847 Power V 60 speed controller
Order No. 2490.6 Drive battery, 6/3600 (two required)
Order No. 3031 G2 battery link lead
Order No. 6306 Speed 700 BB Turbo Neodymium motor
Order No. 3588 Capacitor
Order No. 3389 Cable, 2.5mm²
Order No. 2989 G2 plug + socket, 1 set
Order No. 2318.45 Carbon K-series hydro-propeller, 45 mm
Order No. 3368 Self-adhesive Velcro (hook-and-loop) tape
Order No. 531.19 Cellpack flexible adhesive tape
Order No. 4729 X 408 FM radio control system, 40 MHz
Order No. 6414 Ultramat 14 battery charger
Order No. 3011 Drive battery charge lead
Order No. 3022 Transmitter charge lead
For higher speeds it is also possible to use seven-cell batteries.
Order No. 2490.7
Battery, 7/3600 (two required)
We hope you have many hours of pleasure building and running your new model boat.
Yours - the Graupner Team