GRAUPNER PEP 4318, Manual

Page: 6 / 20

6 / 20
4318_PN_V1
Intended use
PEP is an electric airplane model for advanced beginners. It is suit-
able for 2S lipo batteries up to max. 2200 mAh. The flight character-
istics and look of the model depend directly on the quality of the
bodywork, so the assembly of the model requires a precise and con-
sidered approach.
PEP is designed exclusively to be used in battery-powered, radio con-
trolled models, any other use is not allowed. For any improper use
no guarantee or liability is assumed.
Read through this entire manual before you attempt to install or use
the PEP .
Graupner/SJ
constantly works on the development of all products;
we reserve the right to change the item, its technology and equip-
ment.
Target group
The item is not a toy. It is not suitable for children under 14. Young
people should be overwied and helped by experienced model mak-
ers while assembling and flying this model. The assembly steps are
described as follows and illustrated with assembly photos and
sketches.
If you do not have sufficient knowledge about assembling and deal-
ing with aircraft models, please contact an experienced modeler or
a model club.
Glue
UHU-Holzleim is suitable for almost all of the required gluing pro-
cesses. For some adhesive joints, however, superglue is prescribed,
as indicated in the instructions below.
Parts list No. 4318
Nr. Name Pcs Material Dimension
in mm
1 Fuselage lower part 1 Balsa Laser part 6
2 Cover 1 Balsa Laser part 6
3 Fuselage lower part 1 Balsa Laser part 6
4 Bulkhead 1 Plywood Laser part 3
5 Bulkhead 1 Plywood Laser part 3
6 Bulkhead 1 Plywood Laser part 3
7 Bulkhead 1 Plywood Laser part 3
8 Reinforcement 2 Balsa Laser part 3
9 Reinforcement right 1 Balsa Laser part 3
10 Reinforcement left 1 Balsa Laser part 3