12 / 20
4318_PN_V1
(35) with the sanding block.
To check, attach the wing to
the building board as shown
in the figure and place part
(20). Please note, the small
radius is on the underside of
the wing, the top is profiled
to a depth of about 15 mm
finished with a large radius.
Assembly step 9
Thoroughly sand the top of
the fuselage with the sand-
ing block (54), then glue on
the hull covers (20) and (21)
and secure them. Make
absolutely sure that the ele-
vator support cover (21) is
glued exactly in the middle,
because otherwise later the
rudder sits off-center or
diagonally. Glue the parts
(19) and (22) onto the
engraved fields of the cover
(2).
Assembly step 10
Insert the cover (2), screw
on the cap (24) with the
screw (25). Sand the front of
the fuselage and glue on the
front cover (26), use instant
adhesive; with wood glue
the thin plywood would
bend. Now give the hull its
shape by refining its aerody-
namic shape.
Summary of Contents for PEP 4318
Page 1: ...EN Manual C o p y r i g h t G r a u p n e r S J G m b H No 4318 R Celectricairplane PEP...
Page 2: ......
Page 20: ......
