25 / 36
33032_jp_V1
The battery charger can be used only in dry spaces.
A wet charger, even if re-dried, should no longer be used.
Never use a damaged battery charger.
Due to licensing reasons, any reconstruction and/or modifi-
cation of the product is prohibited.
Be sure that during charge the charger is not covered. The
ventilation slots must be free.
Charge possibilities
CAUTION
The transmitter must be turned off while the entire charging process.
You have two charge possibilities:
1. By removing the battery from its case and charging it with a
charger
Removing transmitter battery
Remove the transmitter lower case.
Then remove and disconnect the battery plug by carefully pull-
ing on the supply cable.
Charge the battery following the charger manual.
Inserting the transmitter battery
Connect the battery plug in the transmitter socket. Make sure
that the polarity is correct. Pay attention to the respective "+"
and "-" symbols near the socket.
Red = +
Black/brown = -
Place the battery into its compartment and close the cover.
2. Through charge socket and charge with AC charger
CAUTION
Do not use plug-in chargers by other manufacturers or chargers that
were designed for different battery types. Transmitter and battery
can be damaged. Risk of fire!
!
!
Summary of Contents for mc-32 HoTT
Page 1: ...Manual part 1 mc 32 HoTT No 33032 Manual EN 1 2 3 4 7 5 6 8 1 2 3 4 7 5 6 8...
Page 2: ...2 36 33032_jp_V1...
Page 35: ...35 36 33032_jp_V1...
Page 36: ......
