23 / 36
33032_jp_V1
Otherwise the RF module will be activated when the transmitter
is switched on and in the display appears a selection indicator.
Select with the selection buttons of the right touch pad RF ON/
OFF. By tipping the SET button on "OFF" the RF module is
switched off.
The color of the lighting central LED changes to red and you are
now in the transmitter main menu display.
The symbol mean that the currently active model memory has
once been linked to a receiver but is presently not linked. (We
have turned the RF module off for example reasons.) If instead
the transmitter was switched on without turning off the RF mod-
ule, the central LED would light blue and the symbol would
blink. Contemporaneously a warning acoustic signal is emitted
until a connection is established with the respective receiver. As
soon as this connection is established appears a a field strength
indicator
and the warning signal stops.
If the telemetry connection is established the respective indica-
tion of the receiver signals strength so as the actual
receiver power supply voltage.
On the other hand, if the screen displays the symbol combina-
tion
and the center LED illuminates in red continuously then
the currently active model memory is not "bound" to any receiver.
Binding
Explications about the binding process can be found in
the Part 2 of the manual.
For a transmitter commissioning the receiver must be bound to
the transmitter. This binding process is necessary for the opera-
tion of the model!
The exact sequence of the binding operation is described in the
section „Binding“ in the Part 2 of the manual and in the respec-
tive receiver manual. Note: The procedure will be different for the
different receiver types.
Charging the transmitter battery
WARNING
Protect the charger from dust, dirt, moisture, vibrations and
other foreign parts.
The charger should always be supervised during charge and
it should be used only in rooms fitted with a smoke detector.
The charger and the battery to be charged must be placed
on a non-combustible, heat-resistant and non-conducting
surface during operation. Do not use the charger near easily
flammable materials.
Verify if the charger is suitable for your battery type.
RF on/off?
OFF
ON
Please select
RF on/off?
ON
Please select
OFF
M
!
Summary of Contents for mc-32 HoTT
Page 1: ...Manual part 1 mc 32 HoTT No 33032 Manual EN 1 2 3 4 7 5 6 8 1 2 3 4 7 5 6 8...
Page 2: ...2 36 33032_jp_V1...
Page 35: ...35 36 33032_jp_V1...
Page 36: ......
