15 / 36
33032_jp_V1
appropriate USB driver can be found on the download page on
www.graupner.de
for the respective product.
4- Data socket
The data socket is suitable for connection of an optional smart
box or an external optional Bluetooth module.
DSC socket
Connection socket for flight simulator or T/P systems
The standard two-pin DSC socket on the transmitter functions
as a TRAINER or PUPIL socket as well as an interface for flight
simulators or other external RF modules.
To ensure a correct DSC connection, observe the following:
1. Perform any necessary adaptations in the menu.
2. When using the transmitter with a flight simulator or during
the teacher-pupil operation, set the On/Off switch
always
on
the "Off" position. Only in this position even after connecting the
DSC cable the RF module of the transmitter remains inactive.
The status LED is constantly red and in the display will appear
DSC.
In the mc-32 HoTT transmitter upper display appears the trans-
mitter logo.
The transmitter is now ready for use.
Note
If the transmitter is used as teacher transmitter it has to be switched
on before connecting the proper cable.
3. Connect the other end of the connecting cable to the device
while observing the relevant operating instructions.
Note
Make sure that all the plugs are securely inserted in the respective
sockets, and only use the provided plug-in connections with a 2-pin
jack plug on the DSC side.
4. In the "Transmitter setting" submenu, you can set one of the
following modes in the "DSC output" line depending on the
number of functions to be transmitted: PPM10, PPM16, PPM18
and PPM24. Default setting: PPM10.
Summary of Contents for mc-32 HoTT
Page 1: ...Manual part 1 mc 32 HoTT No 33032 Manual EN 1 2 3 4 7 5 6 8 1 2 3 4 7 5 6 8...
Page 2: ...2 36 33032_jp_V1...
Page 35: ...35 36 33032_jp_V1...
Page 36: ......
