GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
We reserve the right to introduce modifications. Not liable for printing errors!
11/2011
5
Do not begin the assembly until you have familiarised yourself with the components
and the individual construction stages. If you are not satisfied with any component,
report it to your retailer before you start the construction process.
Using sandpaper or sanding block, sand the control horns on the surfaces to be
glued in order to achieve an adequate connection when gluing.
As seen in the photos, unstick the slots for the GRP control horns, put a dab of glue
into the slot, and push the control horn in until it stops.
Wipe off any excess glue.
Until the glue hardens, the servos are installed in the corresponding mounts and
fastened into the wing or tailplane.
Extend the servo cables using the corresponding extension cable and make sure
they can not come loose, for example with a piece of heat-shrink tubing or a drop of
fast-setting glue. Using the RC system, bring the servos in the middle position and
install the servo levers.
