GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
We reserve the right to introduce modifications. Not liable for printing errors!
11/2011
3
•
Use only suitable cables that are adequate for the electrical currents that occur
during operation.
•
Set up the receiver aerial as far as possible away from the cables carrying the
operating current (at least 3 cm).
•
Clean residual grease from all connections that are to be glued. This could be
done, for example, through sanding and using a non-relubricating cleaning
solution. The same goes for the surfaces to be painted, in order to make sure that
the paint sticks. Before gluing parts, always roughen the corresponding surfaces
(especially for GFR fuselages) carefully with fine sandpaper and de-grease them
thoroughly, for example with acetone. Otherwise, adequate adhesion is not
assured.
Other required accessories
Internal combustion motor and accessories
Recommendations for internal combustion motor
Motor
Order No.
Capacity
cm³
Silencer
Order No.
Propeller
Order No.
OS MAX FS 200 S
2728
32.4
2728.33
Motor accessory
(included)
1318.45.25
Petrol motor
GT 33
2772
33
2772.33
45x25 cm
1314.18x10“
Recommendations for electric motor
Electric
motor
Order No.
Propeller
Order No.
Drive battery
Order No.
Speed
controller
Order No.
COMPACT
740 Z
7780
45 x 25 cm
1326.22x10
LiPo 5/5200
11.1V/5.2Ah
9752.5
COMPACT
CONTROL
90S
7228
Radio control system
It must have at least 5 control functions and 10 servos. Furthermore, the transmitter
must be capable of servo rotation reversal.
Particularly recommended: Computer System MC-22s to MC-24. Servos with
standard dimensions can be installed.
As receiver battery, we recommend: two GRAUPNER 5N-5000 NiMH Order No.
98903.5, which must always be serviced well before and after flight operations,
meaning that the battery has to be charged and discharged again multiple times until
the specified capacity has been reached.
