tor and rudder functions.
ELEVON
(delta /
fl
ying wing models): The servos connected to outputs 2 and 3 assume superimposed
aileron and elevator functions.
5.2.5 Expo Functios (RX CURVE)
To switch to the Expo functions display, press the ENTER button repeatedly until RX CURVE appears
on the screen.
Display
Description
Setup
CURVE1 CH
Channel number, servo curve 1
1 – 8
CURVE1 TYPE
Servo curve 1 Type
A, B, C
CURVE2 CH
Channel number, servo curve 2
1 – 8
CURVE2 TYPE
Servo curve 2 Type
A, B, C
CURVE3 CH
Channel number, servo curve 3
1 – 8
CURVE3 TYPE
Servo curve 3 Type
A, B, C
The servo curve function is used to manage the exponential function for up to three servos.
CURVE1 CH:
this function is used to select the desired
channel of the
fi
rst servo; the remainder of the settings in
CURVE 1 TYPE only affect the channel selected at this
point
CURVE1 TYPE:
at this point you can select the servo curve
for the channel selected under CURVE 1 CH.
A:
EXPO- setting, i.e. the servo responds strongly to stick movements around the neutral position, but
its response reverts to a more linear curve with increasing control surface travel
B:
linear setting: the servo’s response to stick movements is linear
C:
EXPO+ setting, i.e. the servo responds only slightly to stick movements around the neutral position,
but its response reverts to a more linear curve with increasing control surface travel
CURVE2 CH:
this function is used to select the desired channel of the second servo; the remainder of
the settings in CURVE 2 TYPE only affect the channel selected at this point
CURVE2 TYPE:
at this point you can select the servo curve for the channel selected under CURVE 2
CH.
CURVE3 CH:
this function is used to select the desired channel of the second servo; the remainder of
the settings in CURVE 3 TYPE only affect the channel selected at this point
CURVE3 TYPE:
at this point you can select the servo curve for the channel selected under CURVE 3
CH.
RX CURVE < >
CURVE 1 CH : 01
TYPE
:
B
CURVE 2 CH : 02
TYPE
:
B
CURVE 3 CH : 03
TYPE:
B
INC + DEC
INC + DEC
INC
DEC
ENTER
ESC
RX CURVE < >
CURVE 1 CH : 01
TYPE
:
B
CURVE 2 CH : 02
TYPE
:
B
CURVE 3 CH : 03
TYPE:
B
Manual Module M-G2 33302
12
Ser
v
o
w
eg
Geberweg
TYP C
Expo = +100%
TYP A
Expo = –100%
TYP C
Expo = +100%
TYP B
linear
