GRAUPNER EXTRA 300 SHP Indoor, Building Instructions

Page: 27 / 34

GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
27
Keine Haftung für Druckfehler. Technische Änderungen vorbehalten! ID# 0058873 01/2008
Parts List
Part Description
No. off Material Dimensions and thickness in mm
1 Top fuselage reinforcement 2 Depron® Laser-cut, 3 thick
2 Bottom fuselage reinforcement 2 Depron® Laser-cut, 3 thick
3 Elevator 1 Depron® Laser-cut, 3 thick
4 Rear fuselage centre section 1 Depron® Laser-cut, 3 thick
5 Wing 1 Depron® Laser-cut, 3 thick
6 Aileron 2 Depron® Laser-cut, 3 thick
7 Top fuselage section 1 Depron® Laser-cut, 3 thick
8 Bottom fuselage section 1 Depron® Laser-cut, 3 thick
9 Rudder 1 Depron® Laser-cut, 3 thick
10 Motor mount 3 Plastic Inj. moulded
11 Front fuselage centre section 1 Depron® Laser-cut, 3 thick
12 Self-adhesive glass fibre tape Order No. 98709 Length and width as required
13 Wing reinforcement 2 Carbon strip 3 x 0.5 x 1000 mm
14 Upper wing leading edge doubler 1 Depron® Laser-cut, 3 thick
15 Lower wing leading edge doubler 1 Depron® Laser-cut, 3 thick
16 Battery well cover 1 Depron® Laser-cut, 3 thick
17 Double-ended control surface horn 3 Plastic Inj. moulded
18 Hinge lug 6 Plastic Inj. moulded
19 Single-sided control surface horn 2 Plastic Inj. moulded
20 Pushrod 2 Steel wire 0.8 Ø x 60 mm
21 Tailwheel 1 15 mm Ø
22 Tailwheel unit 1 Steel wire 0.8 mm Ø, pre-formed
23 Rudder horn 1 Plastic Inj. moulded
24 Retaining screw 3 Steel M2.0 x 8 mm
25 Rubber grommet 3 Rubber 3 x 2.5 mm
26 Linkage cord 1 Plastic 0.06 Ø x 5000 mm, as required
27 Undercarriage leg 2 Carbon strip 300 x 6 x 1 mm
28 Wheel axle support 2 Plastic Inj. moulded
29 Wheel axle 2 Plastic Inj. moulded
30 Undercarriage fairing 2 Depron® Laser-cut, 3 thick
31 Wheel spat mount 2 Plastic Inj. moulded
32 Wheel spat 2 Depron® Laser-cut, 3 thick
33 Main wheel 2 30 mm Ø
34 Carbon fibre turbulator 2 Carbon strip 195 x 10 x 0.5 mm