GRAUPNER/SJ GmbH 73230 KIRCHHEIM/TECK GERMANY
Subject to modification! No liability for printing errors!
03/2018
-
8
-
Grind the upper side of the fuselage with a sanding pad, then glue the parts (10).
Install the pushrod outer tubes (11). Use the pushrod inner tube to check the smooth
operation of the pushrods. Now glue the installed pushrod outer tubes with the
fuselage, use UHU Kraftkleber superstrong or instant cyano glue.
The sketch shows the glued-on fuselage bottom parts (12) to (14), before the gluing
of the fuselage sand again with a grinding block.
