GRAUPNER/SJ GmbH 73230 KIRCHHEIM/TECK GERMANY
Subject to modification! No liability for printing errors!
03/2018
-
7
-
The prepared left side of the fuselage can now be fitted and glued. Make sure that
the two sides of the fuselage coincide with each other. Using weights, as shown in
the sketch, to keep the parts together until the adhesive is hard.
The illustration shows the front fuselage area; glue the ribs (7) and (8) as well as the
reinforcement (9) as shown in the figure. Be careful; make sure the fuselage is
symmetrical. To check the fuselage on the building plan, lay the fuselage facing to
you. Fix the components with the needles or adhesive tape until the adhesive is hard.
