GRAUPNER altona 2146, Assembly Instructions Manual

Page: 18 / 30

GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Keine Haftung für Druckfehler. Technische Änderungen vorbehalten! 0058434
11/2007
18
43* Cleat 10 Plastic Ready made
44 Fender retaining lanyard 10 Thread 0.8 Ø x 1000 mm overall
45 Seat bench, six-part 7 ABS Laser-cut
46 Fore-and-aft bench strip 28 Mahogany 5 / 2 x 100 mm
47 Transverse bench strip 21 Mahogany 5 / 2 x 22 mm
48 Propeller 1 Plastic Ready made, Order No. 2311.88
48a Shaft coupling 1 Plastic and metal Ready made, Order No. 346
49 Hawser 4 Thread 1.5 Ø x 2000 mm overall
50 Superstructure 1 GRP Ready made
51 Toplight 1 GRP Ready made
52 Toplight cover 6 ABS Vac.-moulded
53* Porthole 6 Plastic Ready made, Order No. 305.2
54 Hinge 12 ABS 30 x 3 x 0.5 mm, as plan
55 Toplight handle 6 Brass rod 1 Ø x 15 mm, as plan
56 Toplight cover strut 4 Brass rod 1.5 Ø x 20 mm, as plan
57 Companionway, five-part 2 ABS Laser-cut
58 Sliding roof, three-part 2 ABS Laser-cut
59 Companionway door 2 ABS Laser-cut
60* Porthole 2 Plastic Ready made, Order No. 305.2
61 Companionway door handle 2 Brass rod 1 Ø x 10 mm, as plan
62 Companionway door hinge 4 Brass rod 1 Ø x 8 mm, as plan
63 Handle 2 Brass rod 1 Ø x 10 mm, as plan
64* Pressure ventilator 2 Plastic Ready made, Order No. 304.2
65* Porthole 10 Plastic Ready made, Order No. 305.2
66 Pressure ventilator, two-part 2 ABS Vac.-moulded
67 Pressure ventilator base 2 Aluminium tube 16 / 15 Ø x 70 mm, overlength
68 Ventilator mounting ring 2 Plywood Laser-cut, 4 mm
69 Step 16 ABS Laser-cut
70 Mounting bracket 32 ABS Laser-cut
71 Handrail 2 Brass rod 1.5 Ø x 50 mm, as plan
72 Handrail 2 Brass rod 1.5 Ø x 60 mm, as plan
73 Handrail 2 Brass rod 1.5 Ø x 30 mm, as plan
74 Sliding hatch 2 ABS Laser-cut
75 Guide rail 6 Brass Channel section, 2.0 x 2.0 x 500
mm overall
76 Handle 2 Brass rod 1.0 Ø x 2.0 mm, as plan
77 Angled hatch 2 ABS Laser-cut
78 Latch arm 4 Brass rod 1 Ø x 10 mm, as plan
79* Lifebelt 2 Plastic Ready made, Order No. 300.33
80 Lifebelt support 2 ABS Laser-cut, as plan
81* Porthole 2 Plastic Ready made, Order No. 305.3
82 Funnel 1 GRP Ready made
83 Threaded rod 2 Steel Ready made, 2.5 Ø x 80 mm
84 Exhaust steam pipe 1 Brass tube 6 / 5 Ø x 270 mm
85 Steam pipe support 2 Brass 40 x 3 x 0.5 mm
86 Steam whistle 1 Brass tube 6 / 5 Ø x 15 mm
87 Tube 1 Brass tube 5 / 4 Ø x 80 mm
88 Support 1 Brass 50 x 3 x 0.5 mm
89 Lever 1 Brass 12 x 3 x 0.5 mm
90 Shaft 1 Brass rod 1 Ø x 10 mm
91 Cable 1 Thread 0.8 Ø x 100 mm
92 Flagstock 1 Beech 4 Ø x 150 mm
93 Mounting tube 1 Brass 5 / 4 Ø x 12 mm
94 Flagstock base 1 Beech 25 x 10 x 2.5 mm
95 Truck 1 Beech 7 Ø x 2 mm
96 Ring 2 Brass Ready made, Order No. 315
97* Flag 1 Fabric Ready made
98 Flag lanyard 1 Thread 0.8 x 400 mm
99 Window frame 10 Mahogany 2 x 3 x 180 mm overall
100 Window frame 10 Mahogany 1 x 5 x 160 mm overall