GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Modifications reserved. No liability for printing errors
12/2010
0062196
14
The canopy can be fitted on the fuselage once the resin has cured: place the canopy
in the recess, and engage the GRP tongue at the rear end. Push the canopy
towards the tail until the pin clears the front flange, and can be engaged in the notch,
then slide it forward again until the canopy fits snugly in the recess.
When you slide the canopy forward, it will naturally centre itself on the fuselage
flange.
Before the RC plate is glued in the fuselage, the special peel ply on the inside of the
fuselage sides must be removed as shown in the picture.
